Olympus e-3 取り扱いマニュアル
79
EN
7
Playback functions
7
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g“REC VIEW” (P. 100)
1
Press the
q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours (factory
default setting). Turn on the camera again.
automatically if there is no operation after 4 hours (factory
default setting). Turn on the camera again.
2
Use
p to select images you want to view. You can
also turn the dial to switch to U for close-up
playback.
playback.
Single-frame/Close-up playback
j
INFO button
< button
p q button
k
L N
N
Press
p to change the
close-up position.
Press
p to move the
display of the close-up
position.
position.
Press
p to view frame-by-
frame close-ups.
• Press the
• Press the
INFO button
to return to close-up
playback.
playback.
(Single-frame playback)
(Close-up playback)
Press the
INFO button
a : Displays the frame that is stored
10 frames back
c : Displays the frame that is stored
10 frames ahead
d : Displays the next frame
b : Displays the previous frame
b : Displays the previous frame
(Close-up position playback)
Press the
INFO button
(Close-up frame-by-frame playback)
• To exit the playback mode, press the
q button.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the
< button
• Plays back the image at a
10× magnified close-up
position.
position.
s0011_e_00_0_unified.book Page 79 Wednesday, September 12, 2007 4:46 PM