Olympus c-60 入門マニュアル
142
9
Direct printing
(PictBridg
e)
If an error code is displayed
If an error code appears on the camera’s monitor during direct print setting or
printing, see the following table.
For more details, refer to the printer’s instruction manual.
printing, see the following table.
For more details, refer to the printer’s instruction manual.
Monitor indication
NO CONNECTION
NO PAPER
NO INK
JAMMED
SETTINGS CHANGED
PRINT ERROR
Corrective action
Disconnect the camera
and connect it again
correctly.
and connect it again
correctly.
Load some paper in the
printer.
printer.
Replace the ink cartridge in
the printer.
the printer.
Remove the jammed
paper.
paper.
Do not manipulate the
printer while making
settings on the camera.
printer while making
settings on the camera.
Turn off the camera and
printer, then turn them on
again.
printer, then turn them on
again.
Possible cause
The camera is not
connected to the
printer correctly.
connected to the
printer correctly.
There is no paper
in the printer.
in the printer.
The printer has run
out of ink.
out of ink.
The paper is
jammed.
jammed.
The printer’s paper
cassette has been
removed or the
printer has been
manipulated while
making settings on
the camera.
cassette has been
removed or the
printer has been
manipulated while
making settings on
the camera.
There is a problem
with the printer
and/or camera.
with the printer
and/or camera.
TIPS
• If an error code other than those shown above is displayed, refer to
“Error codes” (P. 143).