Olympus c-2100 ultra zoom 入門マニュアル

Use this mode to take pictures in sequence.  When the shutter release button
is held down, the camera will take pictures in sequence.  Picture-taking will
stop when you release your finger from the button.  A max. 2 frames/sec. is
available in this mode. (in all record modes except TIFF)  Press 

to

change the function of this mode.  The sequential mode includes:
Single-picture Shooting (no display): Takes only one picture when you

press the shutter button. (Initial setting)

): Takes pictures in sequence.  Focus, brightness

(exposure), and white balance are locked at the first frame.  Up to 5
frames can be taken in sequence at once. The approximate recording
speed during Sequential mode and the number of still pictures that can
be stored is shown below.

): Takes pictures in sequence.  Focus,

brightness (exposure), and white balance are metered and adjusted in
each frame. The speed of picture-taking slows down. Up to 5 frames can
be taken in sequence at once. The approximate recording speed during
Sequential mode and the number of still pictures that can be stored is
shown below.

): Takes pictures with the self-timer/remote-

control. See P.119 to 121 for further information.

Auto bracket (BKT): Takes pictures in sequence. The camera will adjust the

brightness (exposure) in each frame. Focus and white balance are
locked at the first frame. See P.102 for further information.

TIFF

Not available.

SHQ

1.5 frames/sec

approx. 5

HQ

1.8 frames/sec

approx. 16

SQ (640 X 480)

2 frames/sec

approx. 86

●

When using the flash, the speed of sequential shooting slows down, to allow
the flash to recharge.