Olympus c-2100 ultra zoom 入門マニュアル
194
TROUBLESHOOTING
Operating Problems
SYMPTOM
The camera does not work.
POSSIBLE CAUSES
1
The power is OFF.
2
The batteries are loaded
incorrectly.
incorrectly.
3
The batteries are
exhausted.
exhausted.
4
The batteries are
temporarily unable to
function.
temporarily unable to
function.
5
Power has shut off to
conserve battery
consumption.
conserve battery
consumption.
6
It is connected to a
personal computer.
personal computer.
CORRECTIVE ACTION
1
Set the Power switch to ON to
turn on the power.
turn on the power.
2
Reload the batteries correctly.
3
Replace the batteries with
new ones.
new ones.
4
Keep the batteries warm while
using the camera.
using the camera.
5
Operate the camera as
required.
required.
6
The camera will not operate
while it is connected to a
personal computer.
while it is connected to a
personal computer.
REF. PAGE
P. 58
P. 33
P. 33
P. 19
P. 59
P. 187
SYMPTOM
No picture is taken when the Shutter button is pressed.
POSSIBLE CAUSES
1
The flash has not
finished charging.
finished charging.
2
The card access lamp
blinks after shooting in
the mode.
blinks after shooting in
the mode.
3
There is a problem with
the card.
the card.
CORRECTIVE ACTION
1
Remove your finger from the
Shutter button and wait until
the flash charge mark stops
blinking. Take your shot
again.
Shutter button and wait until
the flash charge mark stops
blinking. Take your shot
again.
2
The recorded movie image
data is being written to the
card. You can start shooting
again when the card access
lamp stops blinking.
data is being written to the
card. You can start shooting
again when the card access
lamp stops blinking.
3
See the Error code chart.
REF. PAGE
P. 108
P. 203