Olympus P-10 取り扱いマニュアル

ページ / 148
28
Preparation
Printing
For Your  Information
Introduction
ENGLISH
Troubleshooting
Before sending your printer for service, check the following to try to resolve the 
problem. If the problem persists, contact your nearest OLYMPUS service center.
Problem
Cause·Status
Resolution
Page
Cannot turn the 
printer on.
The AC adapter is not 
connected.
Connect the AC adapter 
properly.
14
Cannot remove 
the ink ribbon 
cartridge.
The printer turned off 
during the operation.
Push the ink ribbon cartridge in 
until you hear a locking sound. 
Turn the printer on again and 
wait until the mechanical sound 
stops.
Printing from the 
digital camera 
takes a long time 
to start.
The printer takes a long 
time to open a TIFF file.
Opening time varies depending 
on the image size. Wait until 
opening finishes.
Trimming selected by 
DPOF takes a long time.
Wait until opening finishes.
Cannot print.
The ink ribbon cartridge is 
not Inserted.
Insert an ink ribbon cartridge.
15
Paper or the paper tray is 
not inserted.
Load paper into the paper tray 
and then install the paper tray.
18, 20
Paper is jammed at the 
paper eject section.
Remove the paper.
29
The printer driver is not 
properly installed on the 
PC.
Install or re-install the printer 
driver on the PC.
24
Indicators light or blink
27
Noise interferes 
with printed 
images.
Pictures that were not 
taken with a digital 
camera were printed from 
a digital camera.
Use a PC to print image data 
that has not been recorded by 
a digital camera.
23
Printing intervals 
have gotten 
longer.
Printing intervals are 
automatically extended 
during continuous printing 
to prevent the internal 
components from 
overheating.
This is not a malfunction. Wait 
a few minutes.
p10_e_000_bookfile.book  Page 28  Monday, December 15, 2003  11:51 AM