Olympus DS-2300 入門マニュアル
51
4
Windows
1
Disconnecting from Your PC
1
Click the
on the task bar
located at the lower-right corner
of the screen. Click [Safely
Remove Hardware].
of the screen. Click [Safely
Remove Hardware].
It will read [Stop USB Disk-Drive] for
Windows Me. The drive letter will differ
depending on the PC being used.
Windows Me. The drive letter will differ
depending on the PC being used.
2
Disconnect the USB cable.
Connection to
Y
our PC
Macintosh
1
Move the icon of the recorder's drive displayed on desktop to trash box by
drag and drop.
drag and drop.
2
Disconnect the USB cable.
....................................................................................................................................................
Notes
• NEVER remove the card or disconnect the USB cable while the record/play indicator lamp is flashing. If you
do, the data on the card will get destroyed.
• When the recorder is connected to a PC, the power will be supplied from the USB cable.
• Refer to the user’s manual for your PC regarding the USB port or USB hub on your PC.
• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
• Refer to the user’s manual for your PC regarding the USB port or USB hub on your PC.
• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
adapter connection) USB hub.
• Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.