Olympus c-8080 wide zoom 入門マニュアル
201
Troubleshooting
(Preparatory operations
Possible cause
Corrective action
Ref. page
The camera does not turn on or function buttons do not respond.
The power is off.
Press the power switch to turn the camera on.
The battery is
exhausted.
exhausted.
Charge the battery.
The battery is
temporarily unable to
function because of
the cold.
temporarily unable to
function because of
the cold.
Warm the battery by putting it in your pocket for a
while.
while.
—
The camera is in the
sleep mode.
sleep mode.
Operate the camera (press the shutter button or
the zoom lever).
the zoom lever).
The camera is
connected to a PC.
connected to a PC.
The camera will not operate while it is connected to
a PC.
a PC.
—
(Shooting
Possible cause
Corrective action
Ref. page
No picture is taken when the shutter button is pressed.
The battery is
exhausted.
exhausted.
Charge the battery.
The camera is in the
playback mode.
playback mode.
Set the mode dial to any position except
q.
The flash has not
finished charging.
finished charging.
Remove your finger from the shutter button, and
wait until
wait until
# stops blinking. Press the shutter button
again.
The card is full.
Erase unwanted pictures or insert a new card.
Before erasing, download important images to a
PC.
Before erasing, download important images to a
PC.
The battery ran out of
power during
shooting or while the
images were being
written to the card.
(The battery check
indicator only blinks.)
power during
shooting or while the
images were being
written to the card.
(The battery check
indicator only blinks.)
Charge the battery. (Wait until the card access
lamp turns off when flashing.)
lamp turns off when flashing.)
The memory gauge is
full.
full.
Wait until there is room in the memory gauge.
There is a problem
with the card.
with the card.
Refer to “Error codes”.
The viewfinder does not turn on.
The monitor is turned
on.
on.
Press
f to turn the viewfinder on.