Olympus e-1 入門マニュアル

It is strongly recommended that you follow these 
step-by-step numbered instructions to set up and 
quickly begin using your new Digital Camera.

For more detailed instructions on advanced features, please refer
to the instruction manual.

Gather your digital camera and the parts as shown in the illustration. You’ll need these to complete the steps for the 
camera set-up procedures that follow.

Cards (Compact Flash and Microdrive) are optional. The following items are also included in this package: Reference manual*

1

, 

Basic Manual*

2

, video cable, warranty card, registration card (not pvovided in some areas), and safety precautions booklet.

*1 Provided as a pdf file on the CD-ROM in some areas.
*2 Provided in areas where the Reference Manual is on the CD-ROM.

Digital camera

Strap

BLM-1 Lithium ion battery 

BCM-1 lithium ion battery charger

CD-ROM

USB cable

(grey color)

IEEE1394 

cable

TIP: After a specified period of time elapses 
with no operations being performed, the 
camera enters the sleep mode (stand-by) to 
save battery power. Press the shutter button 
to wake up the camera.

Before you begin using your Olympus digital camera…

a.

Attach the strap as shown below.

b.

The battery is not fully charged when purchased. Before use, 
be sure to charge the battery with the specified provided 
charger (BCM-1).
Hold the battery with its terminals facing the charger and 
align the battery with the guideline (     ) on the charger as 
shown in the illustration. Slide the battery into the charger.

c.

a.

Although this is not required, it is recommended that you set the 
date and time. This affects the way image file names are 
created, and will conveniently include this information with 
each picture. The date and time can also be set when the 
camera is in the playback mode. 
   • Set the power switch to ON.
   • Press      to display the menu.
   • Press      three times to select     .
   • Press    once to highlight     , and then press    once.
   • Use          to select the date format.
   • Adjust the date and time in the appropriate fields by using

to select the field, and          to set the proper value. 
Repeat this step until all date/time fields have been set.    

   
   • Press OK twice to set the date and time and exit the menu.

b.

c.

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

Printed in Japan

Power switch

Focus mode lever

•

Set the focus mode lever to S.

http://www.olympus.com/

OLYMPUS OPTICAL CO. (EUROPA) GMBH
Wendenstrasse 14-18, 20097 Hamburg, Germany
http://www.olympus-europa.com/

OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville,
NY 11747-3157, U.S.A. 
http://www.olympusamerica.com/E1/

• Power ON : 

Set the power switch to ON.

Power OFF : 
Set the power switch to OFF.

Hot shoe

LIGHT (Control panel 
illumination) button

ISO button

Control panel

     (Exposure 
compensation) button

Mode dial

Power switch

Mode dial lock

Sub dial

 

(White 

balance) button

      (Record mode) button

Shutter button

    (Flash mode) button

External flash 
connector

BKT (Auto bracket) button

DRIVE button

Focus mode lever

DC-IN jack

Connector cover

IEEE 1394 
connector

USB connector

 VIDEO OUT jack

Remote cable 
connector

(Metering) button

Battery 
compartment 
lock

Self-timer/Remote 
control lamp, 
AF illuminator

Remote control 
receiver

      (One-touch WB) button

Preview button

Lens release 
button

Lens lock pin

Mirror

Mount 

(Attach the lens after removing the body 

cap from the camera.)

Lens attachment mark

White balance sensor

Strap eyelet

Eyepiece shutter lever

Viewfinder

Diopter adjustment dial

 

button

Main dial

       (AF frame 
selection) button

Card access lamp

Card cover lock

 

button

Arrow pad 

      (Menu) button

       (Playback 
mode) button

Monitor

(Shown with 
removable monitor 
cover attached.)

(Erase) button

       (Protect) button

 

(Information 

display) button

Tripod socket

Battery compartment 
lock 

Battery compartment 
cover

1) Make sure that the camera's 

power switch is set to OFF.

2) Turn the battery compartment lock to     and 

open the battery compartment cover.

Battery 
compartment 
cover

3) Load the battery as illustrated.

4) Close the battery compartment cover and turn

the battery compartment lock to     .

Direction indicating mark

Card slot

Card cover

When using 
Compact Flash

Card cover lock

When using 
Microdrive

Alignment 
mark (Red)

Lens attachment 
mark (Red)

Mark

e.

1) Turn the card cover lock in the direction of the arrow and open the card cover.
2) Insert the card fully with the    mark side 

facing toward the monitor side (the camera’s 
rear side) as illustrated.

3) Close the card cover fully until it is 

locked closed.

d.

1) Remove the body cap from the camera.
2) Remove the rear cap from the lens.
3) Align the lens attachment mark (red) on the camera 

with the alignment mark on the lens (red), then insert the 
lens into the camera’s body      . Rotate the lens clockwise 
until you hear it click     .

Eject button

Card cover

Card slot

VT429101

E-1-OSG EN  03.7.7 9:58 PM  Page 1