Olympus c-765 ultra zoom 入門マニュアル

ページ / 249
127
Pl
a
yba
ck
7
Recording sound
Sound can be added to a still picture that you have already taken. (This is 
known as “after-recording”) You can also re-record over the sound that has 
already been recorded. Total recording time per picture is approximately 4 
seconds.
1
Use the arrow pad to select the 
still picture you want to add sound 
to.
2
In the top menu, select MODE 
MENU   PLAY   
R.
3
Press 
d to display START.
4
Turn the camera microphone 
toward the sound you want to 
record and press 
e to start 
recording.
• The BUSY bar is displayed during recording.
• If the microphone is placed farther than 1 m (3.3 ft.) from the subject, 
sound may not be recorded properly.
• If you re-record the sound, the original sound is erased.
• You may not be able to record sound when there is insufficient card 
memory (the “CARD FULL” message is displayed).
• Sound recording may pick up camera noises, such as button 
operation or shutter movement.
• Once sound is added to a picture, it is not possible to erase only the 
sound. In this case, make a re-recording with silence.
• This camera cannot play back sound.
Mode dial
Arrow pad
OK button
Microphone
CARD
SEt
EDIt
PLAY
StARt
Note