Olympus c-765 ultra zoom 入門マニュアル
30
M
aci
ntosh
Disconnecting the camera from your computer
1
Make sure that the lamp on the
right of the viewfinder or the self-
timer lamp (which on some
models light while the camera is
connected to the computer) or the
card access lamp is not blinking.
The lamps and their location vary
depending on the model. Refer to
your camera’s reference manual.
right of the viewfinder or the self-
timer lamp (which on some
models light while the camera is
connected to the computer) or the
card access lamp is not blinking.
The lamps and their location vary
depending on the model. Refer to
your camera’s reference manual.
2
Drag the “untitled” icon on the
desktop to “Trash”.
desktop to “Trash”.
3
Make sure that the lamp on the right
of the viewfinder or the self-timer
lamp (which on some models light
while the camera is connected to
the computer) or the card access
lamp is not blinking.
Depending on the camera model, the
green lamp may light or lamps that
were lit while the camera was
connected to the computer may go off. If the lamp is not flashing, then
the cable can be removed.
of the viewfinder or the self-timer
lamp (which on some models light
while the camera is connected to
the computer) or the card access
lamp is not blinking.
Depending on the camera model, the
green lamp may light or lamps that
were lit while the camera was
connected to the computer may go off. If the lamp is not flashing, then
the cable can be removed.
4
Remove the USB cable from the
camera.
camera.
5
Remove the USB cable from your
computer.
computer.
Lamp
Card access lamp
Lamp