Olympus fe-200 入門マニュアル

   EN

• If you use a non-Olympus card or a card used for another application, such as for 

a computer, the message [CARD ERROR] is displayed. To use this card with this 
camera, use the [FORMAT] function to format the card.

This camera uses several lamps to indicate the camera status.

Image quality

Image size

Number of storable still pictures

Internal memory

Card (128 MB)

SHQ

2816

× 2112

5

29

HQ

2816

× 2112

15

86

SQ1

2048

× 1536

29

162

SQ2

640

× 480

130

725

Image quality

Image size

Remaining recording time

Internal memory

Card (128 MB)

With 

sound

Without 

sound

With 

sound

Without 

sound

HQ

320

× 240 

(30 frames/sec.)

33 sec.

33 sec.

3 min. 

12 sec.

3 min. 

13 sec.

SQ

160

× 120 

(15 frames/sec.)

4 min. 

5 sec.

4 min. 

29 sec.

23 min. 

14 sec.

25 min. 

29 sec.

Lamp

Status

Self-timer lamp

The lamp lights for approximately 10 seconds, blinks for 
approximately 2 seconds, and then the picture is taken.

Card access lamp

Lit (red):

Shooting mode and power is on.

Lit (green):

Playback mode and power is on.

Off:

Power is off.

Blinking (red): A picture is being recorded, the camera is 

reading a movie, or images are being 
downloaded (when connected to a computer).

• Do not do any of the following while the card access lamp is 

blinking. Doing so may prevent the image data from being 
saved and render the internal memory or card unusable.

• Open the battery/card compartment cover
• Remove the battery.
• Connect or disconnect the AC adapter.

Green lamp of the 
monitor

Lit: The focus and exposure are locked.
Blinking: focus is not locked
• Release your finger from the shutter button, re-position the AF 

target mark on the subject and press the shutter button 
halfway again.