Olympus e-p1 入門マニュアル

116

EN

• The selection screen for the USB connection is displayed.

fg to select [PRINT]. 

• [ONE MOMENT] is displayed and the camera and 

printer are connected.
Go to “Custom printing” (

gP. 116).

x

• If the screen is not displayed after a few minutes, 

disconnect the USB Cable and start again from Step 1.

hi to display the pictures you want to print on the camera.

• Display the image you want to print on the camera and 

connect the camera with a printer using a USB cable. 
The screen on the right appears shortly.

i.

• The picture selection screen appears when printing is 

completed. To print another picture, use 

hi to select 

the image and press the 

i button.

• To exit, unplug the USB cable from the camera while the 

picture selection screen is displayed.

Select the type of printing (print mode). The available print 
modes are as shown below.
[PRINT]

Prints selected pictures.

Prints all the pictures stored in the 
card and makes one print for each 
picture.

Prints multiple copies of one image in 
separate frames on a single sheet.

Prints an index of all the pictures 
stored in the card.

Prints according to the print 
reservation you made. If there is no 
picture with print reservation, this is not available. (

gP. 113)

Follow the operation guide 
displayed here.

s0019_e_00_0_unified.book  Page 116  Friday, April 24, 2009  9:21 AM