Olympus sp-510 uz 入門マニュアル

Ge
tti

to know you

r cam

bet
ter

There is condensation* inside the camera

• Turn the camera off. Before turning it on again, wait until the camera adjusts to the

surrounding temperature and dries out.
* When it is cold outside, the water vapor in the air is rapidly cooled and turns to droplets

of water. Condensation occurs when the camera is suddenly taken from a cold place

into a warm room.

Vertical lines appear on the monitor screen during shooting

• Aiming the camera at a bright subject in sunlight may cause vertical lines to appear on

the screen. This is not a malfunction.

The camera has been used in the same conditions from the time of purchase

• No date and time have been set for the camera at the time of purchase. Set the date and

time before using the camera.

The batteries have been removed from the camera

• The date and time settings will be returned to the factory default settings if the camera

is left without batteries for approximately 3 days. Before taking important pictures, check

that the date and time settings are correct.

There are several ways to focus, depending on the subject.

When the subject is not in the center of the frame

• Place the subject in the center of the frame, lock the focus on the subject, and then

recompose your picture.

• Set [AF MODE] to [iESP].

The subject is moving quickly

• Focus the camera on a point roughly the same distance away as the subject you want

to shoot (by pressing the shutter button halfway), and then recompose your picture and

wait for the subject to enter the frame.

• Set the mode dial to S to set the shutter speed, and then take the picture. Setting a fast

shutter speed lets you capture fast-moving subjects as though they were standing still.

g “

A/S

The subject is dark.

• Set [AF ILLUMINAT.] to [ON].

The viewfinder or monitor is hard to see

The date and time have not been set

Shooting tips

Focusing on the subject