Olympus evolt e-500 入門マニュアル
146
Direct printing (PictBridge)
9
Pr
inting
Connecting the camera to a printer
Use the USB cable provided to connect the camera to a PictBridge-compatible
printer.
printer.
1
Turn the printer on and plug the
printer end of the USB cable into
the printer's USB port.
printer end of the USB cable into
the printer's USB port.
• For details on how to turn the printer
on and the position of the USB port,
refer to the printer's instruction
manual.
refer to the printer's instruction
manual.
2
Plug the USB cable into the
camera's multi-connector and
turn the camera on.
camera's multi-connector and
turn the camera on.
• The selection screen for the USB
connection is displayed.
3
Use
to select [
< EASY] or
[
< CUSTOM].
If you select [
< EASY]
Go to "Easy printing" (P. 147).
If you select [
< CUSTOM]
ONE MOMENT is displayed and
the camera and printer are
connected. The PRINT MODE
SELECT screen is displayed on
the monitor. Go to "Flowchart for
custom printing" (P. 147).
the camera and printer are
connected. The PRINT MODE
SELECT screen is displayed on
the monitor. Go to "Flowchart for
custom printing" (P. 147).
Notes
• If the screen is not displayed after a few minutes, turn off the camera and start again
from Step 2.
Multi-connector