Olympus evolt e-500 入門マニュアル

174

Camera maintenance

Cleaning and storing the camera 

„

Turn off the camera and remove the battery before cleaning the camera.

J Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild 

soapy water and wring well. Wipe the camera with the damp cloth and then 
dry it with a dry cloth. If you have used the camera at the beach, use a cloth 
soaked in clean water and well wrung.

J Wipe gently with a soft cloth.

J Blow dust off the lens, mirror and focusing screen with a commercially 

available blower. For the lens, wipe gently with a lens cleaning paper. Do not 
use a high-pressure bottled blower. If high-pressure gas is sprayed onto the 
lens, mirror, or focusing screen by non-authorized service persons, the 
camera will be damaged.

„

• When storing the camera for extended periods, remove the battery and card. 

Store the camera in a cool, dry place that is well ventilated.

• Replace the battery periodically and test camera functions.

Cleaning and Checking the CCD
This camera incorporates a dust reduction function to keep dust from getting on 
the CCD and to remove any dust or dirt from the CCD surface with ultrasonic 
vibrations. Dust reduction works when the power switch is set to ON.
Since dust reduction is activated every time the camera's power is turned on, 
the camera should be held upright for the dust reduction function to be 
effective. The SSWF indicator blinks while dust reduction is working. 

  

Notes

• Do not use strong solvents such as benzene or alcohol, or chemically treated cloth.
• Avoid storing the camera in places where chemicals are treated, in order to protect 

the camera from corrosion.

• Mold may form on the lens surface if the lens is left dirty.
• Check each part of the camera before use if it has not been used for a long time. 

Before taking important pictures, be sure to take a test shot and check that the 

camera works properly.