Olympus fe-200 ユーザーズマニュアル

EN   

There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures

• With the digital zoom, part of the image is cropped and enlarged. The greater the 

magnification, the grainier the picture appears.

Shooting pictures with the mode dial set to M, or f mode set to WSX

• When shooting pictures in the above modes, noise reduction works automatically 

if the subject is dark so clear pictures can be taken, but if noise reduction does not 
work the picture appears grainy.

• Often, bright subjects (such as snow) turn out darker than their natural colors. 

Adjust [EXPOSURE COMP.] toward [+] to make these subjects closer to their real 
shades. Conversely, when you are shooting dark subjects, it can be effective to 
adjust toward the [-]. Sometimes, using the flash may not produce the brightness 
(exposure) that was intended.

• Set the flash to [

#] to activate fill-in-flash. You can shoot a subject against 

backlight without the face of the subject appearing dark. [

#] is effective for 

shooting against backlight and under fluorescent and other artificial lighting as well 
as backlit subjects. 

There are two ways to record the pictures you take with this camera.
Recording pictures to the internal memory

• Pictures are recorded to the internal memory, and when the number of storable still 

pictures reaches 0, you must connect the camera to a computer to download the 
pictures, and then erase the pictures from the internal memory.

• Pictures are recorded to the card when inserted in the camera. When the card is 

full, you download the pictures to a computer, and then either erase the pictures 
from the card or use a new card.

• Pictures are not recorded to the internal memory when a card is inserted in the 

camera. Pictures in the internal memory can be copied to the card using the 
[BACKUP] function.