Olympus Stylus 400 Digital 入門マニュアル

ページ / 173
25
1
Ge
tt
in
g
 st
ar
te
d
Power on/off
z
z
z
z
When shooting pictures
Power on:  Open the lens barrier. 
The camera turns on in the shooting 
mode. The lens extends and the 
subject is displayed on the monitor.
If the lens does not extend when the 
lens barrier is opened, there is a 
possibility that the barrier is not fully 
open. Open the lens barrier fully 
until you feel it click.
When using the camera for the first time or after the camera has been 
left for about a day with the battery removed, the date and time are 
reset. In this event, “SET DATE & TIME” appears on the monitor 
when the camera is turned on. 
Press 
 to turn off the monitor. The camera is still on.
Power off:  Close the lens barrier slightly until it almost touches the 
lens barrel.
The lens barrier stops just before it touches the lens and the 
lens retracts. Wait until the lens is fully retracted before closing 
the lens barrier completely.
The camera turns off. (The monitor also turns off.)
TIPS
• To save battery power, the camera automatically enters the sleep 
mode and stops the operation after about 3 minutes of non-
operation. If the monitor is on, it will automatically turn off. The lens 
retracts automatically 5 minutes after that. The camera activates 
again as soon as you lightly press the shutter button or zoom button. 
Whenever possible, turn the camera off when you do not intend to 
take any pictures for a while.
• Do not push the lens barrier forcefully against the lens as this may 
damage the lens or cause it to malfunction.
Note