Olympus E-520 取り扱いマニュアル

ページ / 148
127
EN
13
In
fo
rmatio
n
*1 When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal 
flash before emitting light. 
g“Super FP flash” (P. 76)
*2
AUTO, !, # cannot be set in NIGHT+PORTRAIT mode.
The higher the color temperature, the richer 
the light in bluish tones and the poorer in 
reddish; the lower the color temperature, the 
richer the light in reddish tones and the 
poorer in bluish. The spectral balance of 
different white light sources is rated 
numerically by color temperature — concept 
of physics expressed using the Kelvin (K) 
temperature scale. The color of sunlight and 
other natural light sources and the color of a 
light bulb and other artificial light sources 
can be expressed in terms of color 
temperature.
It follows, then, that the color temperatures of fluorescent lights make them unsuitable as 
artificial light sources. There are gaps in the hues from the color temperatures of fluorescent 
light. If these differences in hue are small, they can be calculated with color temperature and 
this is called correlated color temperature.
The 4000K, 4500K and 6600K preset settings in this camera are correlated color 
temperatures, and should not be considered strictly as color temperatures. Use these 
settings for shooting conditions under fluorescent lights.
S
M
2nd 
CURTAIN
Fill-in flash/Slow 
synchronization 
(2nd curtain)
2nd curtain
Always fires
60 sec. - 
1/180 sec.
#
FULL
Manual flash
(FULL)
1st curtain
#
1/4
Manual flash (1/4)
#
1/16
Manual flash (1/16)
#
1/64
Manual flash (1/64)
White balance color temperature
Shooting 
mode
Super control 
panel screen 
display
Flash mode
Conditions 
to timing
Conditions to fire 
the flash
Shutter 
speed 
restrictions
• The color temperatures for each light source 
indicated in the above scale are approximate.
s0018_e_00_0_unified.book  Page 127  Tuesday, March 18, 2008  4:08 PM