Olympus E-520 取り扱いマニュアル
14
EN
Power on
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device’s filter surface. The
SSWF (Super Sonic Wave Filter) indicator blinks while dust reduction is working.
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device’s filter surface. The
SSWF (Super Sonic Wave Filter) indicator blinks while dust reduction is working.
Adjust the viewfinder’s diopter in
accordance with your vision.
While looking through the viewfinder,
rotate the diopter adjustment dial little by
little.
When you can see the AF target clearly,
adjustment is complete.
accordance with your vision.
While looking through the viewfinder,
rotate the diopter adjustment dial little by
little.
When you can see the AF target clearly,
adjustment is complete.
Adjusting the viewfinder’s
diopter
diopter
Viewfinder
Diopter adjustment dial
AF target
SSWF indicator
When the camera is turned on,
the super control panel screen is
displayed on the monitor.
If the super control panel screen
does not appear, press the
the super control panel screen is
displayed on the monitor.
If the super control panel screen
does not appear, press the
INFO
button.
Set the mode dial to
AUTO.
AUTO.
INFO button
Super control panel
1
Set the camera’s power switch to ON.
• To turn off the power, set the power switch to OFF.
Power switch
Mode dial
LCD monitor
2008. 08.16
AF
arge
Normal
OFF
AUTO
s0018_e_00_0_unified.book Page 14 Tuesday, March 18, 2008 4:08 PM