Olympus E-520 取り扱いマニュアル

43

EN

Exposure

The camera sets the optimum aperture value and shutter speed automatically according to 
the subject brightness.

Set the mode dial to P.
• When the shutter button is half-pressed, the shutter speed 

and aperture value are displayed on the viewfinder. Releasing 
the shutter button displays the shutter speed and aperture 
value on the super control panel screen.

%)

By turning the control dial in the P mode, you can change the combination of 
aperture and shutter speed while maintaining the optimum exposure. 

g“Program line diagram (P mode)” (P. 125)

• The program shift setting will not be canceled after shooting. To cancel 

program shift setting, turn the control dial until the shooting mode indication 
% on the viewfinder or super control panel changes to P or turn off the 
power.

• Program shift is not available when you are using a flash.

j The optimum exposure cannot be obtained. For details, see “Exposure warning 

display” (

gP. 125).

Shooting mode

Shutter speed

Aperture value

Program shift

AF confirmation mark

s0018_e_00_0_unified.book  Page 43  Tuesday, March 18, 2008  4:08 PM