Olympus E-520 取り扱いマニュアル

ページ / 148
56
EN
5
Focusing and shoo
ting functions
The camera’s auto focus may not be able to focus on the subject in situations such as when 
the subject is not in the center of the frame. If this happens, the easiest solution is to use 
focus lock. Use this when composing the subject outside of the AF targets or when the 
subject is difficult to focus on.
1
Adjust the AF target with the subject to be 
focused and press the shutter button halfway 
until the AF confirmation mark lights up.
• The focus is locked. The AF confirmation mark and 
the AF target in focus light up in the viewfinder.
• If the AF confirmation mark blinks, press the shutter 
button halfway again.
• While the shutter button is being pressed, the super 
control panel disappears.
2
While pressing the shutter button halfway, 
move to the desired composition and press 
the button all the way.
• The card access lamp blinks while the picture is 
being stored on the card.
If the subject has lower contrast than its surroundings
If the contrast of the subject is weak, such as when the lighting is insufficient or the subject 
cannot be seen clearly because of fog, the focus may not be achieved. Focus (focus lock) on 
a high-contrast object the same distance away as the intended subject, recompose your shot 
and then take the picture.
Focus lock 
k If correct focus cannot be obtained
Card access lamp
Shutter button
e.g.) The camera focuses using the 
center AF target.
AF target
AF confirmation 
mark
s0018_e_00_0_unified.book  Page 56  Tuesday, March 18, 2008  4:08 PM