Olympus E-520 取り扱いマニュアル

79

EN

Playback functions

The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to 
automatically switch to single-frame playback mode after shooting. 

g“REC VIEW” (P. 99)

q button (Single-frame playback).

• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no 

operations are performed. The camera will turn off 
automatically if there is no operation after 4 hours. Turn on 
the camera again.

p to select images you want to view. You can 

also turn the dial to switch to U for close-up 
playback.

j

INFO button

p

q button

< button

U

G

Press 

p to change the 

close-up position.

Press 

p to move the 

display of the close-up 
position.
When [g FACE DETECT] 
(

gP. 39) is set to [ON], 

a frame is displayed 
around a detected face. 
Press 

i to move the 

frame to another face.

Press 

bd to view frame-

by-frame close-ups.
When [g FACE DETECT] 
is set to [ON], press 

ac 

to move to another face in 
close-up position.
• Press the 

INFO button 

to return to close-up 
playback.

Press the 

INFO button

a : Displays the frame that is 

stored 10 frames back

c : Displays the frame that is 

stored 10 frames ahead

d : Displays the next frame
b : Displays the previous frame

Press the 

INFO button

• To exit the playback mode, press the 

q button again.

• Pressing the shutter button halfway 

resumes the shooting mode.

Press the 

< button

• Plays back the image at a 

10× magnified close-up 
position.

s0018_e_00_0_unified.book  Page 79  Tuesday, March 18, 2008  4:08 PM