Olympus E-520 取り扱いマニュアル

88

EN

Lets you erase recorded images. You can select single-frame erase, which erases only the 
currently displayed image; all-frame erase, which erases all the images stored on the card; or 
selected frame erase, which erases only the frames selected.

x

• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, 

both the RAW and JPEG images are erased. When using single-frame erase, you can select 
whether to erase the JPEG, RAW, or both RAW and JPEG images. 

g“RAW+JPEG 

ERASE” (P. 97)

• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. 

g“Protecting images” (P. 87)

S button.

ac to select [YES], then press the i 

This function lets you erase selected images at one time during single-frame playback or 
index display.

i button. 

• The selected images will be shown with red frames.
• To cancel your selection, press the 

i button again.

• During index display, press 

p to select the images you want to erase and press the i 

button.

p to display the next images you want to erase and press the i button.

S button. 

ac to select [YES], then press the i button.

MENU[W][CARD SETUP]

ac to select [ALL ERASE], then press the i button. 

ac to select [YES], then press the i button. 

• All frames will be erased.

j If you have set “QUICK ERASE” (gP. 96) to [ON], pressing the S button will erase an image 

immediately.

j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 97)

S button

s0018_e_00_0_unified.book  Page 88  Tuesday, March 18, 2008  4:08 PM