Olympus SP-590UZ 入門マニュアル

ページ / 86
1
EN
Selecting the aperture value 
and shutter speed for shooting 
pictures (M mode)
This mode enables the user to set the aperture
value and shutter speed manually.
1
  Set the mode dial to M.
1/1000 F2.8
+2.0
M
12
M
4
IN
N
ORM
NR
Shutter speed Aperture
value
M
mode indicator
Difference between
the current and
correct exposures
2
  After pressing 7, select the 
aperture value / shutter speed using 
789:
, and press the 
o button.
9 :
Aperture value becomes larger.
: :
Aperture value becomes smaller.
7 :
Shutter speed becomes faster.
8 :
Shutter speed becomes slower.
 When the difference between the current
and correct exposures exceeds EV±3.0, the
indicator appears red.
Long-exposure (bulb) shooting
Set the shutter speed to [BULB] by pressing
8
. The shutter stays open while the shutter
button is pressed and held.
 The maximum time that the shutter can
remain open is 8 minutes. This is possible
only when [ISO] (p. 31) is set to [64].
Smoothing out skin tone and 
texture (I mode)
The camera finds a person’s face and gives the
skin a smooth, translucent look for taking the
picture.
1
  Set the mode dial to I.
12
M
4
IN
N
ORM
I
mode indicator
2
  Point the camera toward the 
subject. Check the frame appearing 
around the face detected by the 
camera, and then press the shutter 
button to take the picture.
The unedited image and edited image are both
saved.
If the image cannot be retouched, only the
unedited image is saved.
 The frame may not appear or may take
some time to appear for some subjects. In
addition, this function may have no visible
effect on some subjects.
 The [IMAGE SIZE] of the retouched image
is limited to [J] or lower.