Olympus TG-1 取り扱いマニュアル

EN

3  Move the camera slowly while keeping it straight, and 

stop the camera where the pointer and target mark 
overlap.

 

The camera releases the shutter automatically.

  To combine only two pictures, press the 

A button 

before taking a third frame.

4 Repeat Step 3 to take a third frame.

 

After the third frame is taken, the camera 
automatically processes the frames and the 
combined panorama image is displayed.

  To exit the panorama function without saving an 

image, press the 

 button.

  If the shutter does not automatically release, try 

[Manual] or [PC].

Taking pictures with [Manual]
1 Use 

FGHI to specify at which edge the next 

picture is to be connected.

Direction for combining 

the next frame

2  Press the shutter button to take the fi rst frame. The 

white-boxed part of the fi rst frame is displayed on joint 
area 1. 

1st frame

3  Compose the next shot so that joint area 1 overlaps 

joint area 2.

4  Press the shutter button to take the next shot.

 Press the 

A button to combine just 2 frames.

5 Repeat steps 3 and 4 to take a third frame.

 

After the third frame is taken, the camera 
automatically processes the frames and the 
combined panorama image is displayed.

  To exit the panorama function without saving an 

image, press the 

 button.

Taking pictures with [PC]
1 Use 

FGHI to select the direction that the frames 

are combined.

2  Press the shutter button to take the fi rst frame, and 

then point the camera for the second frame. The 
shooting procedure is same as that of [Manual].

  Panorama shooting is possible for up to 10 frames.

3 Repeat Step 2 until the number of desired frames is 

taken, and then press the 

A button or 

 button 

when fi nished.

  Refer to the PC software help guide for details on 

how to make panorama images.

In this mode, 3D images are shot for viewing on 
3D-compatible display devices.

  Images shot in 3D mode cannot be displayed in 3D 

on this camera’s monitor.

1 Use 

HI to select [Auto] or [Manual] and then press 

the 

A button to set.

Auto

The user only composes the 
shots so that the target marks and 
pointers overlap, and the camera 
automatically releases the shutter.

Manual

After shooting the fi rst frame, move 
the camera to overlap the subject 
with the image in the monitor. Then 
manually release the shutter.