Olympus FE-5020 取り扱いマニュアル

EN

E

 SETUP 

X VIDEO OUT

  The TV video signal system varies depending on the countries and regions. Before viewing camera 

images on your TV, select the video output according to your TV’s video signal type.

NTSC

Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.

PAL

Connecting the camera to a TV in European countries, China, and so on.

  The factory default settings differ according to the region where the camera is sold.

1 Connect the TV and camera.

Connect to the TV video 
input jack (yellow) and 
audio input jack (white).

Multi-connector

AV cable (supplied)

2 Use the camera to select the same video signal system as the one of connected TV 

([NTSC]/[PAL]).

3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”

  For details on changing the input source of the TV, refer to the TV’s instruction manual.

4 Press the 

q button, and use klmn to select the image for playback.

  Depending on the TV’s settings, the displayed images and information may become cropped.

E

 SETUP 

X POWER SAVE

OFF

Cancels [POWER SAVE].

ON

When the camera is not being 
used for approx. 10 seconds, the 
monitor automatically turns off to 
save battery power.

Press any button.

F SILENT MODE]

F

 SILENT MODE

OFF

Button operation sound/shutter 
sound/warning sound/sound of 
image playback of pictures are 
not muted.

ON

The electronic sounds (button 
operation sound, shutter sound, 
warning sound) and playback 
sounds are muted.

  [SOUND SETTINGS] (p. 33)