Olympus µ 830 取り扱いマニュアル
Menu
o
perat
ion
s
s
EN
25
• When [
W] is selected, the following setting restrictions apply.
• The flash mode can only be set to [
#] or [$].
• [ISO] is fixed at [AUTO].
• [IMAGE QUALITY] is limited to [2048 × 1536] and lower.
• [FINE ZOOM], [DIGITAL ZOOM] and [R] cannot be set.
• [IMAGE QUALITY] is limited to [2048 × 1536] and lower.
• [FINE ZOOM], [DIGITAL ZOOM] and [R] cannot be set.
This function allows you to zoom up to 25× by combining the optical zoom and image cropping.
This function will not reduce the image quality since it dose not convert the data with fewer
pixels into the data with larger pixels.
• The available zoom factor varies depending on the [IMAGE QUALITY] setting. This function
This function will not reduce the image quality since it dose not convert the data with fewer
pixels into the data with larger pixels.
• The available zoom factor varies depending on the [IMAGE QUALITY] setting. This function
cannot be set when [IMAGE QUALITY] is set to [SHQ] or [HQ].
The digital zoom can be used to take close-up shots with stronger magnification when
combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 28×)
• This function cannot be set when [FINE ZOOM] is [ON].
combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 28×)
• This function cannot be set when [FINE ZOOM] is [ON].
• Even when [FACE DETECT] is set, the faces may not be detected depending on the subject.
• When [FACE DETECT] is selected, [IMAGE QUALITY] cannot be set to [16:9].
• When [FACE DETECT] is selected, [IMAGE QUALITY] cannot be set to [16:9].
FINE ZOOM
............................. Zooming in on your subject without reducing image quality
OFF /ON
DIGITAL ZOOM
.............................................................................. Zooming in on your subject
OFF /ON
ESP/n
..................................... Changing the area for measuring the brightness of a subject
ESP
Meters the brightness at the center of the monitor and the surrounding area
separately to capture an image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.
separately to capture an image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.
n
Only the center of the monitor is metered. Recommended for taking a picture
against strong backlight.
against strong backlight.
AF MODE
.......................................................................................... Changing the focusing area
FACE
DETECT
DETECT
The camera searches a face within the frame and focus on it.
iESP
The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.
when the subject is not in the center of the screen, focusing is possible.
SPOT
Focus selection is based on the subject within the AF target mark.
P
[IN
IN]
44
[
]
HQ
HQ 3264
3264
×2448
2448
P
[IN
IN]
44
[
]
HQ
HQ 3264
3264
×2448
2448
Zoom bar
White area: The optical zoom area
Red area: The digital zoom area
White area: The optical zoom area
Red area: The digital zoom area
Optical zoom
Digital zoom
d4357_e_0000_72.book Page 25 Monday, July 30, 2007 10:01 AM