Olympus µ 1000 入門マニュアル

1

Press 

2Y. 

2

Press 

12 to select [Y ON], and press o.

3

Press the shutter button fully to take the picture.

 

The self-timer lamp lights for approximately 10 
seconds after the shutter button is pressed, then 
starts blinking. After blinking for approximately 2 
seconds, the picture is taken.

1

Press 

3#.

2

Press 

12 to select the flash mode, and press o.

3

Press the shutter button halfway. 

 

When the flash is set to fire, the 

# mark lights.

4

Press the shutter button completely to take the picture.

 

To save battery power, the camera automatically enters sleep mode and stops 
operating if not used for 3 minutes in shooting mode. Press the shutter button 
or zoom button to reactivate the camera.

 

If the camera is not operated for 15 minutes after the camera enters sleep 
mode, it automatically retracts the lens and turns off. To resume operation, turn 
on the power again.

 

If the camera has been used for a long time, the internal temperature of the 
camera may rise, stopping the operation automatically. In such a case, remove 
the battery from the camera and leave the camera until it becomes cool. The 
camera outside temperature may also rise during operation, but it is not a 
trouble.

Icon

Flash Mode

Description

No 

indication

Auto flash

The flash fires automatically in low light or backlight 

conditions.

!

Red-eye 

reduction flash

This emits pre-flashes to reduce the occurrence of red-

eye in your pictures.

#

Fill-in flash

The flash fires regardless of the available light.

$

Flash off

The flash does not fire even in low light conditions.

Self-Timer Lamp

d4331_basic_e.book  Page 13  Monday, August 7, 2006  2:37 PM