Olympus VN-7000 入門マニュアル

h How to Use the 

While in stop mode

Press and hold the STOP 
(

4) button 

The  total  number  of  files  recorded  in  the 
folder and remaining recording time appears 
on the display.

While in record mode

Press the DISP/MENU 
button

The display switches between current 
recording time and remaining recording 
time.

While in stop mode or 
playback mode

Press the DISP/MENU 
button

Playing time ➔ Remaining playing time 
➔ Recording date of the file ➔ Recording 
time of the file ➔ Playing time … 

U1-BS0120-03

AP1004

Notes:
•  You can switch the time indication between the 12-hour system and the 24-hour system by 

pressing the DISP/MENU button while you are setting the hour or minute.

•  You can change the order of the date indication by pressing the DISP/MENU button while you 

are setting the year, month, or day. 

  Example: July 14, 2010

Current folder

1 Press down on the arrow and slide the 

2 Insert two size-AAA alkaline batteries, 

3 Close the battery cover completely.

•  Time and date display appears.
• The 

“Hour” indicator flashes, indicating the start 

of the time and date setup process. (See “Setting 
Time and Date [TIME]

” for details).

h Inserting Batteries

1 Press and hold the DISP/MENU button for 1 

h Setting Time and Date [TIME]

If you have set the time and date, information as to when a sound file was recorded is stored 
automatically with that file.

h Notes on the Folders

The recorder provides four folders, [F], [G], [H] and [I]. To change the 
folder selection, press the FOLDER/INDEX button while the recorder is 
stopped. Each recorded file is stored in a folder.
Note:
•  Using folders to classify fi les makes it convenient to fi nd fi les you want 

to access later. Up to a total of 100 fi les can be recorded in each folder.

Strap hole

h Identification of Parts

4 through 7 described below.

h Power Supply 

The HOLD switch functions as a power button. When you do not use the recorder, set the HOLD 
switch to the [HOLD] position while the recorder is stopped. This will power off the recorder and 
minimize the battery drain.

 Built-in  speaker

•  Strap is not supplied.

1 Built-in Microphone

2  MIC (Microphone) jack

3 HOLD switch

4 STOP (4) button

5 PLAY (`) button

6 0 (Rewind) button

7 Battery cover

8 FOLDER/INDEX 

HOLD switch.

HOLD switch to the [HOLD] 

If  the  recorder  is  stopped  or  paused  for  60  minutes 
or  longer  during  recording  or  play  back,  it  goes  into 
Standby (power-save) mode, and the display shuts off. 
To exit Standby mode and turn on the display, press 
any button.

hHold

Set the HOLD switch to the [HOLD] position. All opera-
tion buttons are disabled. This feature is useful when the 
recorder has to be carried in a handbag or pocket. 
Remember to reset the HOLD switch before attempting 
to use the recorder.
Notes:
•  The alarm will sound at the scheduled time even if the 

recorder is set to [HOLD] position. The recorder will 
then begin to play the fi le associated with the alarm 
once you press any button.

•  The recorder functions as follows with the HOLD switch 

set to the [HOLD] position:
–  If the recorder is playing, the display goes dark when 

playback of the current file has completed.

– If the recorder is recording, the display goes dark 

when the recorder stops recording automatically 
upon running out of free memory.

2 Press  the  + or – button to 

TIME].

3 Press  the  PLAY  (`) but-

• The 

“Hour” indicator flashes.

4 Press  the  + or – button to 

Hour”.

5 Press  the  PL AY  ( ` ) or 

9 button to accept the 
“

Minute”.

• The 

“Minute” indicator flashes.

• Pressing 

the 

0 button enables 

the “Hour” setting again.

6 Press  the  + or – button to 

Minute”. 

• Repeat 

steps 

5 and 6 to con-

tinue to set the “Year”, “Month” 
and “Date” in the same way.

7 After setting the “Date”, 

PLAY (`) or 9 

•  This completes the time and date 

setup procedure.

REC (s) button

• [PAUSE] appears on the display and the record/play indicator 

light flashes.

REC (s) button again.

•  Recording will resume at the point of interruption.

h Notes for Recording

• If [FULL] appears on the display, you cannot record in the selected folder. In such a case, erase 

unnecessary fi les.

•  If the recorder is placed directly on a table when recording a meeting, it tends to pick up table 

vibrations. Put a notebook or other item between the table and the recorder so that the vibration 
is not easily transmitted for clearer recording.

•  Even if you press the DISP/MENU button, the display will not change to current recording time 

if the remaining recording time is 5 minutes or less.

•  When remaining recording time is less than 60 seconds, the record/play indicator light starts 

fl ashing  in  red.  When  the  recording  time  is  decreased  to  30  or  10  seconds,  the  light  fl ashes 
faster.

•  The recorder will enter Stop mode if it has been left paused for 60 minutes or longer.
•  In case of diffi

    cult acoustic conditions or low speaker’s voice, recording in [HQ] is recommended. 

Also, usage of an external microphone (sold separately) could improve the quality of 
recordings.

The external microphone and other devices can be connected 
and the sound can be recorded.
•  When using an ex ternal microphone, selec t adequate 

microphone, such as a Noise-Cancellation microphone or 
Electret condenser microphone (optional).

•  To  connect  the  recorder  to  an  external  device,  use  the 

connecting cord KA333 (optional), and the stereo/monaural 
converting plug adapter supplied with KA333.

•  The input level cannot be adjusted on this recorder. When 

you connect the recorder to an external device, execute a test 
recording and adjust the output level of the external device.

h LCD Display Information

1 Press the FOLDER/INDEX 

a  Current microphone sensitivity
b  Current folder

2 Press  the  REC (s) button 

•   The record/play indicator light 

turns red, and recording starts.

c  Current recording mode
d  Current file number
e  Recording level meter
f  Recording time

3 Press the STOP (4) button 

•  New recordings are saved as the 

last file in the folder.

g  Remaining recording time

h Recording from external Microphone or other Devices

1 Press the FOLDER/INDEX 

a  Current folder

2 Press the 9 or 0 button to select the file 

3 Press the PLAY (`) button 

• The 

record/play 

indicator 

light 

turns green, and the elapsed 
playing time is indicated on the 
display.

b  Current file number
c  Playing time

STOP (4) button.

•  The recorder stops in the middle of the file being played.

9 button.

•  When you release the 

9 button, the recorder will resume 

normal playback.

0 button.

•  When you release the 

0 button, the recorder will resume 

normal playback.

Notes:
•  When the slow playback mode is selected, the [J] appears and, for the fast playback mode, [K] 

appears on the display while the recorder is playback.

•  The recorder stops playback when you press the STOP (

4) button while playback in the slow/fast 

mode, or when it reaches to the end of the fi le. If you once press the STOP (

4) button and start 

playback again, the recorder will playback fi les in normal speed as well.

9 or 0 

Note:
•  If an index mark is encountered midway, playback begins at that 

point. (See “Index Marks” for details)

Normal speed

Slow Playback

(-25%)

Fast Playback

(+50%)

PLAY ( `) button.

You can select an option for the display of the recorder. This will help review and confirm different 
recorder settings and file information.

When [N] appears on the display, replace the batteries as soon aspossible. Size-AAA alkaline 
batteries are recommended. When the batteries are depleted, [O] appears on the display, and 
the recorder shuts off. It is recommended to set the HOLD switch to the [HOLD] position before 
you replace batteries to maintain the current settings (Time and date, etc.). For your convenience, 
the recorder also logs the current settings in nonvolatile memory at hourly intervals.

A audio input 
terminal of 
other devices

9 EAR (Earphone) jack

0 Display (LCD panel)

! Record/play indicator 

@ REC (s) button

# + button

$ 9 (Fast Forward) 

% – button

^ DISP/MENU button

& ERASE (

s

h Changing Playback Speed:

h To Pause Recording

h Canceling Playback

h Forwarding and Rewinding

Notes:
•  The end of the fi le is located by pressing and holding the 

9 button during fast forwarding. 

The recorder will pause at the end of the fi le. If you do not release the 

9 button, the recorder 

will continue to fast forward.

•  The beginning of the fi le is located by pressing and holding the 

0 button during rewinding. 

The recorder will pause at the beginning of the fi le. If you do not release the 

0 button, the 

recorder will continue to rewinding.

•  When the index mark is shown in the middle of a fi le, it will stop temporarily in the position of the 

index mark.

h Locating the Beginning of the File:

h Safe and Proper Usage

Before using your new recorder, read this manual carefully to ensure that you know how to operate 
it safely and correctly. Keep this manual in an easily accessible location for future reference.
•  The warning symbols indicate important safety related information. To protect yourself and others from 

personal injury or damage to property, it is essential that you always read the warnings and information 
provided.

4 Press the + or –  button to select the proper 

•  The display shows the volume level. You can choose 

between [00] to [30].

Converting
plug adapter
of KA333

(Premises/Goods delivery) Wendenstrasse 14-18, 20097 Hamburg, Germany. Tel. +49 (0)40-237730

(Letters) Postfach 10 49 08. 20034 Hamburg, Germany.

Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjyuku-ku, Tokyo 163-0914, Japan. Tel. +81 (0)3-3340-2111

3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. Tel. 1-888-553-4448

KeyMed House, Stock Road, Southend-on-Sea, Essex, SS2 5QH, UK Tel. +44 (0) 1702 616333

1

2

3

4
5

6

7

8

9

0

@

#

$

%

^

&

!

PLAY (`) button again.

•  Playback will resume at the point of interruption.

h Listening with Earphone

You can listen to files by connecting earphones to the earphone 
jack. If an earphone is connected, the speaker doesn’t emit sound. 
Sound will be played back monaurally.
Notes:
•  To avoid irritation to the ear, insert the earphone after you turn 

down the volume level.

•  When you listen with the earphone during playback, do not raise 

the volume too much. It may cause hearing impairment and loss 
in hearing ability.

•  Earphones are not supplied. You can use any standard 3.5mm 

monaural earphone or headphone.

b

a

f

e

d

c

g

a

c

b

Note:
•  In LP mode, if the remaining time is over 1000 hours, the time will be displayed as 999h 59m 59s.