Olympus VR-360 / VR-350 / VR-340 取り扱いマニュアル

ページ / 77
11
EN
Preparing the Camera
Preparing the Camera
 Inserting the battery and card
1
1
2
Battery/card 
compartment cover
Battery/card compartment lock
2
Write-protect switch
Battery lock 
knob
  Insert the battery as illustrated with the C mark 
toward the battery lock knob.
  Damage to the battery exterior (scratches, etc.) may 
produce heat or an explosion.
  Insert the battery while sliding the battery lock knob in 
the direction of the arrow.
  Insert the card straight until it clicks into place.
  When using the camera, be sure to close the battery/
card compartment cover.
  Slide the battery lock knob in the direction of the 
arrow to unlock, and then remove the battery.
  Turn off the camera before opening the battery/card 
compartment cover.
  Always use SD/SDHC/SDXC cards or Eye-Fi card 
with this camera. Do not insert other types of memory 
cards. “Using the card” (p. 61)
  Do not touch the contact area of the card directly.
  This camera can be used without a card by storing 
images in its internal memory.
2
3
11
  “Number of storable pictures (still images)/Recording 
length (movies) in the internal memory and cards” 
(p. 62)
 To remove the card
 To remove the card
2
1
  Press the card in until it clicks and comes out slightly, 
then grab the card and pull it out.
 Charging the battery with the 
included USB-AC adapter
  The included F-2AC USB-AC adapter (hereafter referred 
to as USB-AC adapter) differs depending on the region 
where you purchased the camera. If you received a plug-
in type USB-AC adapter, plug it directly into AC outlet.