Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ソフトウェアガイド
Switching Commands
534
M4200 and M4300 Series ProSAFE Managed Switches
no ip arp inspection vlan
Use this command to disable Dynamic ARP Inspection on a list of comma-separated VLAN
ranges.
ranges.
ip arp inspection validate
Use this command to enable additional validation checks like source-mac (src-mac)
validation, destination-mac (dst-mac) validation, and IP address validation on the received
validation, destination-mac (dst-mac) validation, and IP address validation on the received
ARP packets. Each command overrides the configuration of the previous command. For
example, if a command enables source-mac and destination-mac validations, and a second
command enables IP validation only, the source-mac and destination-mac validations are
disabled as a result of the second command.
command enables IP validation only, the source-mac and destination-mac validations are
disabled as a result of the second command.
no ip arp inspection validate
Use this command to disable the additional validation checks on the received ARP packets.
ip arp inspection vlan logging
Use this command to enable logging of invalid ARP packets on a list of comma-separated
VLAN ranges.
VLAN ranges.
no ip arp inspection vlan logging
Use this command to disable logging of invalid ARP packets on a list of comma-separated
VLAN ranges.
VLAN ranges.
Format
no ip arp inspection vlan vlan-list
Mode
Global Config
Default
disabled
Format
ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode
Global Config
Format
no ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode
Global Config
Default
enabled
Format
ip arp inspection vlan vlan-list logging
Mode
Global Config
Format
no ip arp inspection vlan vlan-list logging
Mode
Global Config