Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ソフトウェアガイド
Routing Commands
668
M4200 and M4300 Series ProSAFE Managed Switches
show route-map
To display a route map, use the show route-map command in Privileged EXEC mode.
Command example:
(NETGEAR Switch) # show route-map test
route-map test, permit, sequence 10
Match clauses:
ip address prefix-lists: orange
Set clauses:
set metric 50
Router Discovery Protocol Commands
This section describes the commands you use to view and configure Router Discovery
Protocol settings on the switch. The Router Discovery Protocol enables a host to discover the
IP address of routers on the subnet.
Protocol settings on the switch. The Router Discovery Protocol enables a host to discover the
IP address of routers on the subnet.
ip irdp
This command enables Router Discovery on an interface or range of interfaces.
Term
Definition
Interface
The interface.
Route-map
The route map
Format
show route-map [map-name]
Mode
Privileged EXEC
Parameter
Description
map-name
(Optional) Name of a specific route map.
Default
disabled
Format
ip irdp
Mode
Interface Config