Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ソフトウェアガイド
Management Commands
78
M4200 and M4300 Series ProSAFE Managed Switches
show ip ssh
This command displays the ssh settings.
Management Security Commands
This section describes commands you use to generate keys and certificates, which you can
do in addition to loading them as before.
do in addition to loading them as before.
crypto certificate generate
Use this command to generate a self-signed certificate for HTTPS. The generated RSA key
for SSL has a length of 1024 bits. The resulting certificate is generated with a common name
equal to the lowest IP address of the device and a duration of 365 days.
for SSL has a length of 1024 bits. The resulting certificate is generated with a common name
equal to the lowest IP address of the device and a duration of 365 days.
no crypto certificate generate
Use this command to delete the HTTPS certificate files from the device, regardless of
whether they are self-signed or downloaded from an outside source.
whether they are self-signed or downloaded from an outside source.
Format
show ip ssh
Mode
Privileged EXEC
Term
Definition
Administrative
Mode
This field indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level
The protocol level may have the values of version 1, version 2 or both versions 1 and version 2.
SSH Sessions
Currently Active
Currently Active
The number of SSH sessions currently active.
Max SSH Sessions
Allowed
The maximum number of SSH sessions allowed.
SSH Timeout
The SSH timeout value in minutes.
Keys Present
Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation in
Progress
Progress
Indicates whether RSA or DSA key files generation is currently in progress.
Format
crypto certificate generate
Mode
Global Config
Format
no crypto certificate generate
Mode
Global Config