Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ソフトウェアガイド

This command deletes the authorization method list.

When authorization is configured for a line mode, the user manager sends information about 
an entered command to the AAA server. The AAA server validates the received command, 
and responds with either a PASS or FAIL response. If approved, the command is executed. 
Otherwise, the command is denied and an error message is shown to the user. The various 
utility commands such as tftp, ping, and outbound telnet should also pass command 
authorization. Applying the script is treated as a single command apply script, which also 
goes through authorization. Startup-config commands applied on device boot-up are not an 
object of the authorization process.

The per-command authorization usage scenario is this:

Configure Authorization Method List

aaa authorization commands listname tacacs radius none

Apply AML to an Access Line Mode (console, telnet, SSH)

authorization commands listname

Commands entered by the user will go through command authorization via TACACS+ or 
RADIUS server and will be accepted or denied.

Format

aaa authorization {exec | commands} {default | list-name} method1 

[method2…]

Mode

Global Config

exec

Provides authorization for user EXEC terminal sessions.

commands

Provides authorization for all user-executed commands.

default

The default list of methods for authorization services.

list-name

Character string used to name the list of authorization methods.

method1 [method2…]

Use either tacacs or radius for authorization purpose.

Format

no aaa authorization {exec | commands} {default | <list-name>} 

<method1> [<method2>…]

Mode

Global Config