Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch 管理者ガイド
Port Routing
63
ProSAFE M4100 Managed Switches
CLI: Add a Default Route
(FSM7338S) (Config) #ip route default?
<nexthopip> Enter the IP Address of the next router.
(FSM7328S) (Config)#ip route default 10.10.10.2
Note:
IP subnet 10.10.10.0 should be configured using either port routing
(see
(see
Web Interface: Add a Default Route
1.
Select Routing > Routing Table > Basic > Route Configuration.
The Route Configuration screen displays.
2.
In the Route Type list, select DefaultRoute.
3.
In the Next Hop IP Address field, enter one of the routing interface’s IP addresses.
•
The Network Address and Subnet Mask fields will not accept input as they are not
needed.
needed.
•
The Preference field is optional. A value of 1 (highest) will be assigned by default if
not specified.
not specified.
4.
Click the Add button on the bottom of the screen.
This creates the default route entry in the routing table.