Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch 管理者ガイド
DiffServ
167
ProSAFE M4100 Managed Switches
Auto VoIP
The Auto-VoIP feature makes it easy to set up VoIP for IP phones on a switch. This
functionality copies VoIP signaling packets to the CPU to get the source and destination IP
address and Layer 4 port of the current session. Based on these parameters a filter is
installed to assign the highest priority to VOIP data packets. As soon as the call ends, the
filters are removed.
functionality copies VoIP signaling packets to the CPU to get the source and destination IP
address and Layer 4 port of the current session. Based on these parameters a filter is
installed to assign the highest priority to VOIP data packets. As soon as the call ends, the
filters are removed.
PBX
GSM73xxS
Voice traffic
Data traffic
VoIP
phone
phone
VoIP
phone
phone
VoIP
phone
phone
PC
PC
PC
Data server
Figure 17. Auto VoIP
The example is shown as CLI commands and as a Web interface procedure.
CLI: Configure Auto VoIP
This script in this section shows how to set up auto VoIP system-wide.
1.
Enable auto VoIP on all the interfaces in the device.
(Netgear Switch) (Config)# auto-voip all