Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router ユーザーズマニュアル



Launch a web browser from a computer or wireless device that is connected to the 

network.

Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the 

web browser.

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.

The Port Forwarding/Port Triggering screen displays.

Leave the Port Forwarding radio button selected as the service type.

In the table, select the radio button next to the service name.

Click the Delete Service button.

The service is deleted.

If you host a web server on your local network, you can use port forwarding to allow web 
requests from anyone on the Internet to reach your web server. 



Assign your web server either a fixed IP address or a dynamic IP address using DHCP 

address reservation. 

In this example, your router always gives your web server an IP address of 192.168.1.33. 

In the Port Forwarding/Port Triggering screen, configure the router to forward the HTTP 

service to the local address of your web server at 192.168.1.33. 

HTTP (port 80) is the standard protocol for web servers.

(Optional) Register a host name with a Dynamic DNS service and specify that name in the 

Dynamic DNS screen of the router. 

Dynamic DNS makes it much easier to access a server from the Internet because you 
can type the name in the Internet browser. Otherwise, you must know the IP address that 
the ISP assigned, which typically changes.