Netgear WC7520 - ProSafe 20-AP Wireless Controller 参照マニュアル
Configuring Wireless and QoS Settings
110
ProSafe 20-AP Wireless Controller WC7520
Figure 51.
2.
Click a tab to select a radio.
3.
For each profile on a wireless radio, specify the rate limit as a percentage. You can use the
slider bars to adjust the values in the rate limit fields to the right of the slider bars. Make sure
that the total percentages of all profiles on one wireless radio do not exceed 100 percent.
slider bars to adjust the values in the rate limit fields to the right of the slider bars. Make sure
that the total percentages of all profiles on one wireless radio do not exceed 100 percent.
4.
Click Apply to save your settings.
Advanced Rate Limiting for Profile Groups
For each profile group, and for each radio mode (802.11b/bg/ng mode and 802.11a/na
mode), rate limiting per profile adds up to a maximum of 100 percent. (It can be less than
100 percent.) There is a tab for each group and for each wireless radio mode.
mode), rate limiting per profile adds up to a maximum of 100 percent. (It can be less than
100 percent.) There is a tab for each group and for each wireless radio mode.
To configure advanced rate limiting:
1.
Select Configuration > Profile > Advanced > Rate Limit. The advanced Rate Limit
screen displays:
screen displays:
Figure 52.