Netgear WC7520 - ProSafe 20-AP Wireless Controller 参照マニュアル
Monitoring the Wireless Network and Components
180
ProSafe 20-AP Wireless Controller WC7520
View the Wireless Controller Summary Screen
Figure 104.
The following table explains the fields of the Network Status, Wireless Clients, Rogue Access
Points, Network Info, and Redundancy Status tables on the Controller Summary screen:
Points, Network Info, and Redundancy Status tables on the Controller Summary screen:
Table 46. Controller summary information
Item
Description
Network Status section
For each access point and client, the following information displays:
Total
Up
The total number of managed devices that are running correctly.
Down
The total number of managed devices that cannot be pinged.
Alarms
Critical
The wireless controller can ping these managed devices, but either cannot log in or
has detected that these device are different from the ones that were configured.
has detected that these device are different from the ones that were configured.
Major
The number of managed devices for which the configuration differs from the one
that is set on the wireless controller. This situation occurs most likely because the
device runs outdated firmware or the wireless controller changed the configuration
while the device was down or offline.
that is set on the wireless controller. This situation occurs most likely because the
device runs outdated firmware or the wireless controller changed the configuration
while the device was down or offline.
Wireless Clients section
For each wireless client, the following information displays:
Open
The number of wireless clients that are connected to managed access points using
security profiles configured with open mode.
security profiles configured with open mode.
WEP
The number of wireless clients that are connected to managed access points using
security profiles configured with WEP.
security profiles configured with WEP.