Netgear WC7520 - ProSafe 20-AP Wireless Controller 参照マニュアル

For information about how to configure client authentication and data encryption, see 

For information about how to configure authentication servers, see 

on page 122.

Single Controller Configuration with Basic Profile Group

A basic configuration consists of a single wireless controller that controls a collection of 
access points that are organized into the basic default group.



WPA2 

AES or TKIP+AES

One of the following authentication servers:

• External RADIUS server

• Internal authentication server

• External LDAP server

WPA and WPA2 

TKIP+AES

One of the following authentication servers:

• External RADIUS server

• Internal authentication server

• External LDAP server

Optional: Create an RF plan.

If you have not yet done so, configure the system settings of the 
wireless controller:

 

1. Configure the country code of operation.

2. Configure the IP address of wireless controller.

3. Verify that VLAN 1 is set as the management VLAN and is 

marked as untagged, which is the default setting.

Configure up to 8 profiles, and for each profile, do at least the 
following:

 

1. Configure an SSID for wireless access.

2. Configure the network authentication and data encryption.

3. Assign the VLAN.

If required, configure the authentication server.

Run the Discovery Wizard and add the access points to the 
managed access point list.