Netgear WC7520 - ProSafe 20-AP Wireless Controller 参照マニュアル

Click Apply to save your settings.

Edit and Remove Profiles from the Basic Profile Group



On the Basic Profile screen, click a tab to select a profile.

Click a tab to select a radio.

Change the settings as explained in the previous table and the following table.

Click Apply to save your settings.



On the Basic Profile screen, click a tab to select a profile.

Click a tab to select a radio.

Click Delete, and then confirm that you want to delete the profile.

Open System, Shared 
Key, WPA-PSK, 
WPA2-PSK, and 
WPA-PSK & WPA2-PSK

 

(continued)

Captive Portal Select this check box if you want to enable the captive portal. 

For more information, see 

You cannot configure captive portal authentication if the 

network authentication uses an external RADIUS server. That 
is, if you configure an external RADIUS server with WPA, 
WPA2, or WPA & WPA2 (or if you use legacy 802.1X), the 
Captive Portal check box is not shown onscreen.

WPA with Radius,

 

WPA2 with RAdius, and

 

WPA & WPA2 with Radius

Authentication 
Server

Select one of the following radio buttons:

•  Local. Use the local authentication server.

•  External. Use an external authentication server. Select an 

external authentication server from the Authentication Server 
drop-down list.

For information about setting up and enabling internal 

and external authentication servers, see 

page 122.

Wi-Fi Multimedia (WMM)

To enable Wi-Fi Multimedia (WMM), select the Enable radio button, which is 
the default setting. Select the Disable button to disable the feature. For more 
information, see 

on page 105.

WMM Powersave

The WMM Powersave feature saves power for battery-powered equipment by 
increasing the efficiency and flexibility of data transmission. To enable this 
feature, select the Enable radio button, which is the default setting. Select the 
Disable button to disable the feature.