Netgear WC7600v1 - ProSAFE Wireless Controller ユーザーズマニュアル
Controller-Managed Access Points
376
ProSAFE Wireless Controller
Change IP Address and VLAN Settings on a
Controller-Managed Access Point
Controller-Managed Access Point
By default, a controller-managed access point functions as a DHCP client. The only reason to
manually change the IP address settings on a controller-managed access point is that you
must assign a static IP address to the access point.
manually change the IP address settings on a controller-managed access point is that you
must assign a static IP address to the access point.
Make sure that the new IP address is in the same Layer 2 or Layer 3 network as the wireless
controller, otherwise the wireless controller cannot reach the access point after you change
the IP address.
controller, otherwise the wireless controller cannot reach the access point after you change
the IP address.
If you configure a static IP address for the access point, you must also specify the IP address
of the wireless controller.
of the wireless controller.
You can also change the VLAN settings. However, if you change the VLAN, make sure that
you configure the correct management VLAN ID and state whether it is tagged or untagged,
otherwise the wireless controller cannot reach the access point after you change the VLAN
settings.
you configure the correct management VLAN ID and state whether it is tagged or untagged,
otherwise the wireless controller cannot reach the access point after you change the VLAN
settings.
To change the IP address settings or VLAN settings on a controller-managed access
point:
point:
1.
Find the IP address of the access point on your network.
2.
In the address bar, enter the IP address of the access point.
A login window displays.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The Network Settings page displays. (The full path is Configuration > System >
Network Settings.)
Network Settings.)