Netgear FVX538v1 – ProSafe VPN Firewall Dual WAN with 8-Port 10/100 and 1 Gigabit LAN Port Switch 参照マニュアル

6-26

Router and Network Management

You can monitor the status of both of the WAN connections, the Dynamic DNS Server 
connections, and the DHCP Server connections. Select Network Configuration from the main 
menu and WAN Settings from the submenu. The WANI ISP Settings screen will display. Click 
the WAN Status link to obtain status on the WAN1 port. Select the WAN2 IAP Settings tab and 
click the WAN Status link to obtain status on the WAN2 port.

WAN1 Configuration

Indicates whether the WAN Mode is Single, Dual, or Rollover, and whether the WAN 
State is UP or DOWN. It also displays if:
• NAT is Enabled or Disabled. 
• Connection Type: DHCP enabled or disabled.
• Connection State
• WAN IP Address
• Subnet Mask
• Gateway Address
• Primary and Secondary DNS Server Addresses
• MAC Address.

WAN2 Configuration

Displays the same details as for WAN1 Configuration.

Note: The Router Status screen displays current settings and statistics for your router. As 

this information is read-only, any changes must be made on other pages.