Netgear FVX538v1 – ProSafe VPN Firewall Dual WAN with 8-Port 10/100 and 1 Gigabit LAN Port Switch 参照マニュアル
ProSafe VPN Firewall 200 FVX538 Reference Manual
4-28
Firewall Protection and Content Filtering
v1.0, March 2009
•
Maximize-Reliability: Used when data needs to travel to the destination over a reliable link
and with little or no retransmission. The IP packets for services with this priority are marked
with a ToS value of 2.
and with little or no retransmission. The IP packets for services with this priority are marked
with a ToS value of 2.
•
Maximize-Throughput: Used when the volume of data transferred during an interval is
important even if the latency over the link is high. The IP packets for services with this priority
are marked with a ToS value of 4.
important even if the latency over the link is high. The IP packets for services with this priority
are marked with a ToS value of 4.
•
Minimize-Delay: Used when the time required (latency) for the packet to reach the
destination must be low. The IP packets for services with this priority are marked with a ToS
value of 8.
destination must be low. The IP packets for services with this priority are marked with a ToS
value of 8.
Setting a Schedule to Block or Allow Specific Traffic
Schedules define the timeframes under which firewall rules may be applied.
Three schedules, Schedule 1, Schedule 2 and Schedule3 can be defined, and any one of these can
be selected when defining firewall rules.
be selected when defining firewall rules.
To invoke rules based on a schedule, follow these steps:
1. Select Security from the main menu and Schedule from the sub-menu. The Schedule 1 screen
will display.
Figure 4-17