Netgear FVX538v1 – ProSafe VPN Firewall Dual WAN with 8-Port 10/100 and 1 Gigabit LAN Port Switch 参照マニュアル
ProSafe VPN Firewall 200 FVX538 Reference Manual
Firewall Protection and Content Filtering
4-35
v1.0, March 2009
To remove an entry from the table, select the IP/MAC Bind entry and click Delete.
Port Triggering
Port triggering allows some applications running on a LAN network to be available to external
applications that would otherwise be partially blocked by the firewall. Using this feature requires
that you know the port numbers used by the Application.
applications that would otherwise be partially blocked by the firewall. Using this feature requires
that you know the port numbers used by the Application.
Once configured, Port Triggering operates as follows:
1. A PC makes an outgoing connection using a port number defined in the Port Triggering table.
2. The VPN firewall records this connection, opens the additional INCOMING port or ports
associated with this entry in the Port Triggering table, and associates them with the PC.
3. The remote system receives the PCs request and responds using the different port numbers that
you have now opened.
4. The VPN firewall matches the response to the previous request, and forwards the response to
the PC.
Without Port Triggering, this response would be treated as a new connection request rather than a
response. As such, it would be handled in accordance with the Port Forwarding rules:
response. As such, it would be handled in accordance with the Port Forwarding rules:
•
Only one PC can use a Port Triggering application at any time.
•
After a PC has finished using a Port Triggering application, there is a Time-out period before
the application can be used by another PC. This is required because this Router cannot be sure
when the application has terminated.
the application can be used by another PC. This is required because this Router cannot be sure
when the application has terminated.
To add a Port Triggering Rule:
1. Select Security from the main menu and Port Triggering from the submenu. The Port
Triggering screen will display.
1. Enter a user-defined name for this rule in the Name field.
2. From the Enable pull-down menu, indicate if the rule is enabled or disabled.
Note: For additional ways of allowing inbound traffic, see
.