Netgear UTM9S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules 参照マニュアル

Click Apply to save your settings.

For all UTM models with the exception of the UTM50, the DMZ LED 

next to LAN port 4 (see 

on page 22) lights green 

to indicate that the DMZ port is enabled. For the UTM50, the DMZ 
LED next to LAN port 6 lights green to indicate that the DMZ port is 
enabled.

For information about how to define the DMZ WAN rules and LAN DMZ rules, see 

on page 133 and 

on page 136, respectively.

Manage Routing

Static routes provide additional routing information to your UTM. Under normal 
circumstances, the UTM has adequate routing information after it has been configured for 

Enable LDAP 
information

To enable the DHCP server to provide Lightweight Directory Access Protocol 
(LDAP) server information, select the Enable LDAP information check box. Enter 
the following settings:

LDAP Server

The IP address or name of the LDAP server.

Search Base

The search objects that specify the location in the directory tree 
from which the LDAP search begins. You can specify multiple 
search objects, separated by commas. The search objects 
include:

• CN (for common name)

• OU (for organizational unit)

• O (for organization)

• C (for country)

• DC (for domain)

For example, to search the Netgear.net domain for all last 
names of Johnson, you would enter:

cn=Johnson,dc=Netgear,dc=net

Port

The port number for the LDAP server. The default setting is 0 
(zero).

Enable DNS Proxy

This setting is optional. To enable the UTM to provide a LAN IP address for DNS 
address name resolution, select the Enable DNS Proxy check box. This check box 
is selected by default.

When the DNS Proxy option is disabled, all DHCP clients receive the DNS 

IP addresses of the ISP but without the DNS proxy IP address.