Netgear UTM9S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules 参照マニュアル

From the Select Network drop-down list, select one of the following components:

All (that is, all interfaces, the slot in which the xDSL module is installed, and all VLANs 

and WLANs)

A single WAN interface

The slot in which the xDSL module is installed (SLOT-1 or SLOT-2)

A single VLAN or WLAN

Specify how the output is saved by selecting either the Store on your desktop radio button 
or the Store on the UTM radio button.

Click Start. 

If you select the Store on your desktop radio button, you are 

prompted to save the traffic information file to your computer; 
however, do not save the file until you have stopped capturing the 
traffic flow.

When you want to stop capturing the traffic flow, click Stop.

Take one of the following actions:

If you selected the Store on your desktop radio button, select a location to save the 

captured traffic flow. 

If you selected the Store on the UTM radio button, click Download, and then select a 

location to save the captured traffic flow.

The default file name is diagnostics.result.dat. The file is downloaded to the location that 
you specify.

When the download is complete, browse to the download location that you specified, and 
verify that the file has been downloaded successfully.

Optional: Send the file to NETGEAR technical support for analysis.

Gather Important Log Information and Generate a

Network Statistics Report (All Models)

When you request support, NETGEAR technical support might ask you to collect the debug 
logs and other information from your UTM.

This section discusses the Gather Important Log Information section, Network Statistics 
Report section, and Reboot the System section of the Diagnostics screen.