Netgear UTM9S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules 参照マニュアル
xDSL Module for the UTM9S
503
ProSecure Unified Threat Management (UTM) Appliance
4.
Configure secondary WAN addresses on the WAN port (optional). Configure aliases for
the WAN port. See
the WAN port. See
5.
Configure Dynamic DNS on the WAN port (optional). Configure your fully qualified
domain names during this phase (if required). See
domain names during this phase (if required). See
6.
Configure the WAN options (optional). Optionally, you can enable the WAN port to
respond to a ping, and you can change the factory default MTU size and port speed.
However, these are advanced features, and changing them is not usually required. See
respond to a ping, and you can change the factory default MTU size and port speed.
However, these are advanced features, and changing them is not usually required. See
Each of these tasks is detailed separately in this appendix.
Note:
For information about how to configure the WAN meter, see
Configure the xDSL Settings
Before you can configure the DSL Internet connection to your ISP, you need to configure the
ADSL or VDSL settings and, if required, the ATM multiplexing method. These settings are
usually provided by your ISP, but you can autodetect these settings.
ADSL or VDSL settings and, if required, the ATM multiplexing method. These settings are
usually provided by your ISP, but you can autodetect these settings.
Note:
Autodetecting the DSL settings takes about 25 minutes.
To configure the xDSL settings:
1.
Select Network Config > WAN Settings. The WAN screen displays (see
2.
Click the Edit button in the Action column of the SLOT-x interface. The SLOT-x ISP Settings
screen displays (see
screen displays (see
3.
Select the xDSL Settings option arrow. The xDLS Settings screen displays: