Netgear UTM9S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules 参照マニュアル
xDSL Module for the UTM9S
528
ProSecure Unified Threat Management (UTM) Appliance
5.
Click Apply to save your changes.
WARNING!
Depending on the changes that you made, when you click Apply,
the UTM9S restarts, or services such as HTTP and SMTP might
restart.
the UTM9S restarts, or services such as HTTP and SMTP might
restart.
Additional WAN-Related Configuration Tasks
•
If you have not done so already, configure the WAN interfaces of the UTM9S (see
•
If you want the ability to manage the UTM9S remotely, enable remote management (see
on page 399). If you enable remote
management, NETGEAR strongly recommend that you change your password (see
•
You can set up the traffic meter for the DSL interface, if you wish. See
Use this MAC Address
Select the Use this MAC Address radio button, and manually enter the MAC
address in the field next to the radio button. You would typically enter the MAC
address that your ISP is requiring for MAC authentication.
address in the field next to the radio button. You would typically enter the MAC
address that your ISP is requiring for MAC authentication.
Note:
The format for the MAC address is 01:23:45:67:89:AB (numbers
0–9 and either uppercase or lowercase letters A–F). If you enter a MAC
address, the existing entry is overwritten.
address, the existing entry is overwritten.
Failure Detection Method
See
on page 516, including
Table 137. Advanced DSL settings (continued)
Setting
Description