Netgear UTM9S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules 参照マニュアル

Click Apply to save your settings. The profile is updated in the List of Profiles table.

Configure the Access Point

The wireless access point provides the following features:

Capability to turn off the wireless access point during scheduled vacations and office 

shutdowns, on evenings, or on weekends. This a green feature that allows you to save 
energy.

MAC address access control list that lets you add another level of security.

Capability to monitor the wireless access point and its connected clients.

Authentication

Specify the authentication by making a selection from the drop-down list:

•  Open System. Select this option to use WEP encryption without 

authentication.

• Shared Key. Select this option to use WEP authentication and encryption 

with a shared key (passphrase).

Encryption

Select the encryption key size by making a selection from the drop-down list:

•  64-bit WEP. Standard WEP encryption, using 40/64-bit encryption.

•  128-bit WEP. Standard WEP encryption, using 104/128-bit encryption.

•  256-bit WEP. Standard WEP encryption, using 232/256-bit encryption.

Passphrase

Enter a passphrase. The passphrase can have a maximum of 64 characters. 
The secret passphrase allows you to automatically generate the keys by 
clicking Generate. 

Encryption Key
(Key1–Key4)

Specify the active key by selecting one of the four radio buttons. Only one key 
can be the active key. Either enter a key manually or generate the key 
automatically by clicking Generate. The length of the key depends on the 
selected encryption:

•  64-bit WEP. A key length of 5 ASCII or 10 hexadecimal characters.

•  128-bit WEP. A key length of 13 ASCII or 26 hexadecimal characters.

•  256-bit WEP. A key length of 29 ASCII or 58 hexadecimal characters.

Wireless stations need to use the key to access the wireless access 

point.